PAGE 1 OF THE REPORT IS IN THREE SECTIONS
First Section
The first page is in 3 sections, "Ratings", "Measurements" and "Margins and Recommended Inflation PSI". The first section, "Ratings", contains the various ratings for the tires, axles, chassis and hitch as prescribed by the manufacturer. This information is taken off the data label on the motorhome, tires and hitch.
Second Section
The data recorded in the "lbs." boxes are the actual wheel weights. The data recorded in the "PSI" boxes are measured PSI and will have a yellow flag if the current inflation is more than 5 lbs. different (either high or low) from the tire manufacturer's suggested PSI for the measured load.
Third Section
In the third section, if a measured component exceeds the rating it will be flagged red, otherwise the number indicates the remaining capacity for that component. Recommended tire pressures are shown in the PSI boxes.
PAGE 2 OF THE REPORT IS IN 2 SECTIONS
First Section
"Tire Status" provides the position, manufacturer, size, year produced (which will flag yellow at 6 years old and red at 7+ years), suggested inflation as given in the table without regard to what's on the other end of that axle (these pressures may be different than the recommended pressures on page 1 due to imbalance considerations) and individual tire load.
Second Section
Summarizes the "Margin" numbers from Page 1, along with side-to-side axle imbalances and front-to-rear % loads compared to industry accepted standards. Red flags in the "Status" column indicate an overload for that item.